Computerized Cam Analysis

Product Code LTEKCTLB-DYM09-16003

Description & Specification

Computerized Cam Analysis

The experimental Computerized Cam Analysis unit allows the dynamic investigation of a cam mechanism at various speeds. Four typical cams with corresponding engaging members are compared in terms of their motion behavior. The valve is simulated with a mass and a spring.

A recorder synchronized with the cam member records the actual elevation curve of the cam mechanism. A speed-controlled drive motor with a large flywheel generates a speed as constant as possible. The open design means that the motion is clearly visible in every detail.

A transparent protective cover ensures safe operation. The experimental unit is intended for demonstration in engineering education. It is not suitable to be used as a test bench in the field of endurance testing/tribology.

FEATURES

Record elevation curves of cam mechanisms
Four different cam members, two different engaging members
Influence of spring stiffness and mass on the dynamic behavior
Determine the limit speed and compare with theory
Influence of moving mass on the motion of cam member/plunger
Influence of return-spring stiffness and preload on the motion of cam member/plunger
Comparison of the elevation curves of different cam-member shapes
Comparison of elevation curves with theory

SPECIFICATION

Cam-shaped cam members: tangent cam, hollow cam, 2 circular arm cams with different head radius
2 different engaging members: flat receiver with plunger or rolling receiver with plunger
3 interchangeable return springs and spring preload Oscillating mass can be increased with 5 additional weights
Optical speed sensor
Transparent protective cover for safe operation
Drive motor

DC asynchronous motor with frequency converter

Power: 250W

Speed: 60…670min^-1

Cam-shaped cam member

Stroke, each: 15mm

Opening angle, each: 140°

Spring stiffness

Hard: 5,026N/m

Medium: 2,601N/m

Soft: 613N/m

Masses

Additional masses supplied with different weights

Recorder: toothed belt drive
Power required for operation

230V, 50Hz, 1 phase
230V, 60Hz, 1 phase; 120V, 60Hz, 1 phase

DIMENSIONS AND WEIGHT

L x W x H (approx.): 800 x 600 x 500 mm
Weight: 85kg

Trusted Computerized Cam Analysis Manufacturer & Supplier

LTekOnline are the manufacturers of Computerized Cam Analysis used to demonstrate engineering principles in Engineering Colleges, Engineering Schools, and Dynamics of Machine Lab Equipment for Engineering Teaching Lab in Universities. We supply Computerized Cam Analysis to TVET institutes, vocational training centres, polytechnics and research labs across more than 90 countries, with quality testing technology, comprehensive operation manuals and full after-sales support.

Manufactured to international standards

Detailed operation & experiment manuals

Turnkey lab installation & training

Worldwide shipping & on-site support