Quality Assured
Worldwide Shipping
Expert Support
HSI Training System Refrigeration and Air Conditioning Technology, Base Unit
Description & Specification
HSI Training System Refrigeration and Air Conditioning Technology, Base Unit
Categories:
Thermal Training Equipment
Technical Specifications
The base unit is, dependent on the objective of the experiment, extended into complete refrigeration circuit with one of the models available as accessories.
The main components of compressor, condenser and receiver plus electrical and communications systems. The models are plugged onto the base unit and connected hydraulically with refrigerant hoses and electrically with cables. Self-sealing couplings reduce the refrigerant loss to a minimum. All components are arranged well visible to allow their operation to be monitored.
Temperatures and pressures in the system are recorded by sensors and displayed dynamically in the software for system operation and data acquisition. The refrigerant mass flow rate is calculated in the software from the recorded measured values. The effect of parameter changes can be tracked in log p-h and h-x diagrams. The system is also operated via the software.
The modern and powerful software is an integral part of the training system in the form of hardware/software integration (HSI). It enables the comfortable execution and analysis of the experiments. The experimental unit is connected to the PC via a USB interface.
The software consists of a software for system operation and for data acquisition and an educational software. With explanatory texts and illustrations the educational software significantly aids the understanding of the theoretical principles. Each model has its own software matching the learning objectives. With the aid of an authoring system, the teacher can create further exercises.
Technical details
Specification
Basic experiments on the operation of refrigeration and air conditioning systems by combining the base unit and models
Condensing unit consisting of compressor, condenser and receiver
Connection between condensing unit and model via refrigerant hoses
Training system with hsi technology
Manometer for refrigerant with temperature scale.
Technical data:
Compressor
Power consumption: 288W at 7,2/54,4°C
Refrigeration capacity: 463W at 7,2/54,4°C
Receiver: 0,7L
Refrigerant
R513A
GWP: 631
Filling volume: 700g
CO2-equivalent: 0,4t
Measuring ranges
Temperature: 1x -50…50°C, 3x 0…100°C
Pressure:
1x intake side: -1…9bar
2x delivery side: -1…15bar
Flow rate: 0…19kg/h (refrigerant)
230V, 50Hz, 1 phase
230V, 60Hz, 1 phase
120V, 60Hz, 1 phase
