Quality Assured
Worldwide Shipping
Expert Support
Plastic Digital Melt Flow Index Apparatus Meter Tester Test Equipment
Description & Specification
Plastic Digital Melt Flow Index Apparatus Meter Tester Test Equipment
Categories:
Plastic/Rubber Test Machine
Technical Specifications
This test method is particularly useful for quality control tests on thermoplastics.
Plastic and Rubber Melt Flow Index Mfi Testing Machine is a new and affordable tabletop instrument that tests the melt mass-flow rate (MFR) of a wide range of thermoplastic raw materials, in the form of granules, strips of film etc.
Features :
Function. The use of advanced PID control technology and high speed and high resolution sampling circuit, make the machine in constant temperature is the following characteristics:
A: heating speed, the dinky overshoot.
B: constant temperature and high precision.
C: in the packing after, can quickly restored constant temperature condition.
Using advanced electronic measurement technology, liquid crystal display test results, the micro printer output results and calculating the quality of the melt flow rate (MFR) or melt volume flow rate (MVR) (note: single determination value and many times the average of the cutting material).
Tester compact structure, beautiful, the control system can real time measurement and display temperature numerical, has the upper limit temperature protection, constant temperature sound reminders, response time tip etc.
Specifications:
Pistons parameters: Piston head: 9.475±0.015mm
Piston length: H=6.35±0.1mm
Parameters: Extrusion hole 1=2.095±0.005mm
Display resolution: 0.1degree centigrade
Maximum consumption: < 600W
Temperature recovery time: less than 4 min.
Machine size(W*H*D): 250*510*350mm
Power: AC220V±10% 50Hz
Barrel parameters: Inner hole 9.55±0.025mm
Temperature parameter: With intelligent temperature control instrument, with four pairs of significant temperature setting control, PID parameters can be automatically set, precision up to ± 0.1 degree centigrade
Temperature range radius: 400degree centigrade
Temperature accuracy blade to jawand dust collector: ±0.2 degree centigrade
Test flow control
Times of cutting the material: 0~10 times
Material cutting interval: 0~999s(set reference Table 2)
Control flow reaches the set temperature without volatility
Barrel temperature time: 15 min.
Material be installed: 1 min
Material sample temperature recovery time: 4 min.
When binder set: 1min
Position detection
Loop distance from up and down: 30mm
Control precision: ± 0.1mm
Weight parameters
Weight accuracy: ±0.5%
Basic configuration: 0.325kg, 1.kg, 2.1kg, 3.kg, 5.kg, 10.0kg, 12.kg, 21.6kg.
