Tenders Description & Specification for Verticle CNC Milling M/C.
Verticle CNC Milling M/C.
Over 500kgs aging-treated cast iron frame to prevent losing accuracy by time
Full linear ways and C3 class ground ballscrews for all 3 axis
HIWIN™
High precision class linear ways and C3 class ground ballscrews for all
3 axis / Z axis enhanced with heavy duty roller type linear ways
AC SERVO driving BT30 spindle system with Pneumatic PDB
Industrial precision BT30 spindle unit / High end AC SERVO spindle motor system
AC SERVO 3 axis driving system
AC SERVO motor system for all 3 axis / Run faster, more smoothly and never lose step
Industrial 4 axis /5 axis CNC control system
Industrial
CNC controller with Additional control panel / Compatible G code system
/ Full English operation&programming manuals
Full enclosure and integrated coolant&chip removing system
Industrial style full enclosure / Chip drand coolant system built in cabinet stand / Easy moving FOOT MASTER casters
2nd High speed engraving spindle (optional)
Special optional 2nd engraving spindle for precision 3D engraving works
Harmonic drive 4th/5th axis system (optional)
| DIMENSIONS | |
| Table Size: | 760mm×240mm / 30”×9.8” |
| Table Slots: | 5×14mm Slots |
| Travel Range (X Y Z): | 420mm×250mm×400mm / 16.5”×10”×15.7” |
| MAX Spindle Nose to Table: | 450mm / 17.7” |
| MIN Spindle Nose to Table: | 50mm / 2” |
| Spindle Center to Column: | 280mm / 11” |
| MONTION FEATURES | |
| Max On Table Weight: | 100Kgs |
| Max Feed Rate: | 10MPM / 393IPM |
| Positional Tolerance: | 0.005mm/200mm |
| Repeatable Tolerance: | ≤0.005mm |
| XYZ Traveling Tolerance: | ≤0.02mm /200mm |
| 1st Spindle Radio/Axial Run Out: | ≤0.008mm at 200mm |
| SPINDLE CONFIGRATIONS | |
| 1st Spindle Taper: | BT30 |
| 1st Spindle Speed: | 100-8000RPM |
| 1st Spindle Driving System: | 2200W AC SERVO Motor System |
| 1st Tool Changing: | Air drive power drawbar |
| ATC System: | 12 tool ATC optional |
| MOTION PARTS | |
| 3 Axis Driving: | High Performance AC SERVO driving System |
| 3 Axis Motion: | HIWINTM H Class LINEARS for all 3 axis |
| Ballscrews: | C3 Class Ballscrews |
| Bearings: | P4 Class Bearings |
| ELECTRONICS | |
| CNC Controller: | SKYFIRE 4 axis/5axis industrial CNC controller |
| Axis Driving Power Supply: | AC power supply |
| Relay Output: | Integrated and expandable |
| POWER REQUIREMENTS | |
| Power Input: |
210-240VAC 50/60HZ Single Phase 220/380VAC 3-phase optional |
| Power Consumption: | Typical 5000W |
| MISCELLANEOUS FEATURES | |
| Machine Shell: | Full closed enclosure with cabinet stand |
| Spindle Box Balancing: | 2x Nitrogen springs |
| Lubrication: | AUTO centralization lubrication |
| Work Light: | LED work light |
| Coolant System: | Coolant system with swarf drawer integrated |
| Mist Cooling System: | optional |
| MPG: | optional |
| Air Blow Gun: | included |
| Air Source: | >0.5Mpa |
| Tooling & Accessories: | optional (refer to detailed tooling lists) |
| Other CNC Control System: | optional |
| OVERALL FEATURE | |
| Overall Dimensions(L*W*H): | LWH 950*1500*1700mm |
| Net Weight: | 650kgs |
| Package Dimensions(L*W*H): | LWH 1050*1600*1900mm |
| Gross Weight: | 750kgs |
| Package Type: | Composite Plywood Case |
Ltekonline are the manufacturers of Verticle CNC Milling M/C. used to demonstrate engineering principles in Engineering Colleges, Engineering Schools and Workshop Machines and Tools for Engineering Teaching Lab in Universities
Categories: Workshop Machines and Tools
