Quality Assured
Worldwide Shipping
Expert Support
50L 100L Glass Liquid Separator
Description & Specification
50L 100L Glass Liquid Separator
Categories:
Glass Liquid Separator
Technical Specifications
The frame-type main body is made of aluminum alloy + stainless steel.
The whole set of glass is made of GG17 high borosilicate glass + PTFE discharge valve, discharge side without liquid.
Low-speed power-increasing motor, electronic stepless speed regulation, fine-tuning by twisting, digital display of speed, safe and stable, and can work continuously.
The stirring system adopts ceramic bearings and mechanical seals to prevent the stirring rod from being worn and chipped.
Crescent type stirring blade, 304 stainless steel + PTFE stirring blade; the stirring rod is made of 304 stainless steel, wrapped with PTFE tube.
There is a universal wheel with brake at the bottom of the machine, which can be moved as a whole and is easy to operate.
Fuse safety protection.
Capacity: 50L cylinder type φ365mm inner length 576mm 100L cylinder type φ465mm inner length 696mm
Voltage frequency: 220V/50Hz: 220V/50Hz
Motor Power: 120W 1/3: 200W 1/3
Rotating speed: 0-450rpm/min
Kettle body: φ470mm four ports φ340mm four ports
Stirring port: φ80mm flange mouth
Feeding port: 34# standard port
Decompression port: 34# standard port
Lower discharge port: φ80mm flange mouth
Mixer: φ17*900H(mm) Leaf spread 190mm φ17*1200H(mm) Leaf spread 240mm
Feeding valve: 34# standard plug valve feeding nozzle (pagoda joint) outer diameter 12mm
Pressure reducing valve: 34# standard plug valve vent nozzle (pagoda joint) outer diameter 12mm
Discharge port: φ80mm flange φ33mm discharge hole Oblique discharge port (pagoda joint) φ34mm 350mm from the ground
The whole machine occupies space size: 720*600*1800mm 750*800*2100mm
The whole set of glass is made of GG17 high borosilicate glass + PTFE discharge valve, discharge side without liquid.
Low-speed power-increasing motor, electronic stepless speed regulation, fine-tuning by twisting, digital display of speed, safe and stable, and can work continuously.
The stirring system adopts ceramic bearings and mechanical seals to prevent the stirring rod from being worn and chipped.
Crescent type stirring blade, 304 stainless steel + PTFE stirring blade; the stirring rod is made of 304 stainless steel, wrapped with PTFE tube.
There is a universal wheel with brake at the bottom of the machine, which can be moved as a whole and is easy to operate.
Fuse safety protection.
Capacity: 50L cylinder type φ365mm inner length 576mm 100L cylinder type φ465mm inner length 696mm
Voltage frequency: 220V/50Hz: 220V/50Hz
Motor Power: 120W 1/3: 200W 1/3
Rotating speed: 0-450rpm/min
Kettle body: φ470mm four ports φ340mm four ports
Stirring port: φ80mm flange mouth
Feeding port: 34# standard port
Decompression port: 34# standard port
Lower discharge port: φ80mm flange mouth
Mixer: φ17*900H(mm) Leaf spread 190mm φ17*1200H(mm) Leaf spread 240mm
Feeding valve: 34# standard plug valve feeding nozzle (pagoda joint) outer diameter 12mm
Pressure reducing valve: 34# standard plug valve vent nozzle (pagoda joint) outer diameter 12mm
Discharge port: φ80mm flange φ33mm discharge hole Oblique discharge port (pagoda joint) φ34mm 350mm from the ground
The whole machine occupies space size: 720*600*1800mm 750*800*2100mm
