Quality Assured
Worldwide Shipping
Expert Support
Mechatronics Training Equipment
Description & Specification
Mechatronics Training Equipment
Categories:
Process Control Trainers
Technical Specifications
Control monitor system is with good test technology capacity, can simulate industrial boiler water quality testing requirement, can real time, accurately test boiler water pH value(it means boiler water quality)condition.
According to the industry standard requirement on boiler water quality PH value, real time automatically test, accurate data collection, delivery to training workbench center in time, set observe and control CPU control signal, make observe and control CPU add water, add acid, alkalify and pollution discharge.
Through this training system, to learn students to understand boiler water acid, learn through on/off, or control injection to control ration, to learn to control Ph value, through manual control acidification and alkalify value to adjust PH value, learn three control method of PH value control.
Capacitance and parameters
Control console external dimension:1000×700×1400mm.
Water sample input tube diameter:φ8.
Acidification .alkalify input tube diameter :φ8.
Pollution discharge tube diameter :φ8.
Input power supply :AC 220(±22)V. power:200W.
Measurement parameter name and measurement range:
pH value:pH:(0～14.00)pH.
mV:(0～±1999)mV.
Conductivity /TDS value:conductivity :(0～9999)μS/cm3.
TDS value:(0～9999)mg/L.
Temperature value:(-5.0～105.0)℃. Normally water sample temperature is controlled at ≤40℃.
Alarm type and format:
pH value alarm, through display window set parameter to control alarm value.
Conductivity value alarm, through window set parameter to control alarm value.
TDS value alarm, through display window parameter setting to control alarm value.
Controable signal name and signal type:
Control signal: add water, acidification .alkalify, pollution discharge.
Power input: 24V DC power
Work environment:-10～40℃
According to the industry standard requirement on boiler water quality PH value, real time automatically test, accurate data collection, delivery to training workbench center in time, set observe and control CPU control signal, make observe and control CPU add water, add acid, alkalify and pollution discharge.
Through this training system, to learn students to understand boiler water acid, learn through on/off, or control injection to control ration, to learn to control Ph value, through manual control acidification and alkalify value to adjust PH value, learn three control method of PH value control.
Capacitance and parameters
Control console external dimension:1000×700×1400mm.
Water sample input tube diameter:φ8.
Acidification .alkalify input tube diameter :φ8.
Pollution discharge tube diameter :φ8.
Input power supply :AC 220(±22)V. power:200W.
Measurement parameter name and measurement range:
pH value:pH:(0～14.00)pH.
mV:(0～±1999)mV.
Conductivity /TDS value:conductivity :(0～9999)μS/cm3.
TDS value:(0～9999)mg/L.
Temperature value:(-5.0～105.0)℃. Normally water sample temperature is controlled at ≤40℃.
Alarm type and format:
pH value alarm, through display window set parameter to control alarm value.
Conductivity value alarm, through window set parameter to control alarm value.
TDS value alarm, through display window parameter setting to control alarm value.
Controable signal name and signal type:
Control signal: add water, acidification .alkalify, pollution discharge.
Power input: 24V DC power
Work environment:-10～40℃
