Plate Heat Exchanger

Plate Heat Exchanger is one of the different heat exchanger designs of the experimental bench. The experimental part is a teaching module for studying the heat transfer performance of plate heat exchangers. The valve on the water supply device is used to adjust the cold and heat. The flow of water, the quick connector can adjust the flow direction of water, and meet the heat exchange design of different flow directions such as countercurrent and downstream. The plate heat exchanger is welded by two special-shaped plates and has two separate flow channels. When the cold and hot water flows through, part of the heat energy of the hot water is transferred to the cold water. The temperature sensors at the inlet and outlet respectively set the temperature to record the temperature of each point of the loop, and the measured value is directly displayed on the display. You can also use the data acquisition software to record the data for further processing and calculate other physical parameters such as heat transfer coefficient.

Features:

Plate heat exchanger adopts modular design, which is convenient for comparison and research

Transient data during the change of the workbench is directly displayed on the display in digital form;

Plate heat exchanger is connected for experiment during experiment, which is convenient for disassembly and storage

During the experiment, the circulating loop water temperature and circulating water flow can be adjusted smoothly.