Quality Assured
Worldwide Shipping
Expert Support
Directional Pulse Hole Metallizing
Description & Specification
Directional Pulse Hole Metallizing
Categories:
PCB Lab Equipment
Technical Specifications
Structure:
Fully ABS engineer plastic machine body and inner groove, with antiseptic, thermo stability, technology flow is beautiful.
Use high speed pulse power source for plating, supply uniform good quality coating.
Cathode oscillation technology, prevent , concentration gradient, add hole inner liquid flowability.
Environment protection black hole technology flow application, No pollution, it can direct discharge.
Technical Specification:
With 4 groove structure, with acid-washing, soak conducting resin, activate, electroplating function.
Time setting: work time preset function, time remaining display and automatic power off alarm.
LCD:6 inch full color LCD, display all work specification.
Circuit protection: with short circuit, open circuit function, supply alarm signal.
Use transparent flip function, it is easy to observe and storage.
Output current: forward direction 0-5A, reverse 0-20A adjustable.
Output frequency: 0-2kHz adjustable(it can change as DC power)
Pulse width: use pulse directional power, forward direction 0-100%, reverse pulse 0 to 100% single adjustable.
Maximum board: 400×400mm, it can electroplating 5 boards at the same time.
Minimum hole diameter: 0.3mm
Maximum thickness ratio 5:1
Constant voltage constant current: current or voltage is constant, with self adjust function, 2 directional current real time display function.
